24poorts Gigabit PoE switch

24 poorts Gigabit PoE switch met auto detectie en identificatie volgens IEEE802.3af/at

Topproduct!

More details

NS-796-0011
Neu

€ 440,00 inkl. MwSt.

- +

 
More info

Features

  • Support power over ethernet cable device for example wireless AP and IP camera.
  • Support IEEE802.3af/at standard .
  • Data and power transmission distance 100m, it can be flexible installation for wireless AP and surveillance project.
  • 4.1Mbit Packet buffer size;
  • 10K Bytes of packet length;
  • Adopted storage forward switch system.
  • Support the full port loaded with IEEE802.3 af /at power supply;
  • Smart power and minimum consumption,guarantee PD requirement.
  • With power supply circuit protection function and protection back-end device safety
  • Automatically provide the adaptive device
  • PSE modular design can flexible select PoE mode, easy to install
  • Support IEEE802.1 Q VLAN and 4K VLANs
  • Support IEEE 802.3、IEEE802.3u、IEEE802.3x、IEEE802.3az standard;
  • Dynamic LED, Provide the tips of simple working state and troubleshooting

Specificatie

Network Port

  • 10/100/1000MbpsPoERJ45port(port 1~port24)
  • 2 Gigabit SFP port(25 port-26 port)

Transfer Pattern

Full wired-speed store-and-forward

Performance

  • bandwidth:52Gbps(non-blocking)
  • network delay(100to1000Mbps):maximum 20μs(using 64 byte packet)
  • network delay(1000to1000Mbps):maximum 10 μs(using 64 byte packet)
  • MAC address capacity:8K
  • Frames filter and transfer rate:
    • 10M: 14,880 pps/port
    • 100M: 148809 pps/port
    • 1000M: 1488095 pps/port

Network protocol and standard

  • IEEE802.3ad,LACP;
  • IEEE802.3u,Fast Ethernet;
  • IEEE802.3ab,Gigabit Ethernet standard
  • IEEE802.3x,Full-duplex Ethernet data link layers;
  • IEEE802.3af/at,Ethernet power supply POE standard ;
  • IEEE802.3az,EEE ,Energy efficient Ethernet standard;
  • IEEE802.3z ,Gigabit Ethernet fiber-optic standards;

POE pin

1/2(+),3/6(-);

LEDsindicator

  • Power、POE
  • Link/ACT,1000M

Power supply

  • Total power:250W(All PoE port,port1~port24)single port max 30W
  • Input power:250W;48V@8.3A DC output power;

Dimensions

  • Size(LxWxH):440mmx 290mmx 44mm
  • Weight:5.5kg

Environment

  • Operating Temperature:0°~40°C(32°~104°F)
  • Storage Temperature:-40℃~70℃(-104°~158°F)
  • Working Humidity:10%~90%(Non-condensing)
  • Storage Humidity:5%~90%(Non-condensing)

EMC

  • CEClassB
  • FCCPart15,ClassB
  • VCCIClassB
  • C-Tick

Certifications

  • CE,ROHS,FCC

Beschrijving van indicator LEDs

Indicator

Beschrijving

Normal State

Abnormal and Process

PWR

PWR Indicators

Red Light ON

If red light off, pls check whether the external power supply plug powered normal and whether the power adaptor connect correctly.


POE

POE Indicators

Red Light ON

If red light off, pls check whether the corresponding RJ45 access network device and the network cable connect correctly, whether the network cable is accord with Cat.5 standard(transmission distance max. 100meter)、whether the network cable and network device is damaged.

ACT/LINK

PD Device Connection Indication

Yellow Light ON

If light off,pls check whether the corresponding RJ45 access network device and POE powered normal、whether the network cable connect correctly and network device is damaged.

1000M

PD device Traffic Status

Green Light ON

If light off,pls check whether the corresponding RJ45 access network device and POE powered normal、whether the network cable connect correctly and network device is damaged.

Notities

  1. Pls be careful the risk of strong current and security protection when product is carrying on power
  2. Pls select the right power adaptor provide power for PoE switch,before using pls confirm if is it accord with the requirement of PoE switch
  3. Pls don’t use PoE switch under the humid environment,avoiding water go into the product inside caused PoE switch breakdown
  4. Pls start the power after the circuit connected
  5. Pls don’t plug-in and plug-out the connection cable when product is carrying on power
  6. Pls don’t use PoE switch under somewhere with more dust and EME
  7. Pls don’t put heavy product on PoE switch , in order to having an accident
  8. According to the IEEE802.3AF/AT standard, pls use the Cat.5 or above,transimission distance up to 100 m
  9. Pls don’t exceed the maximum output power of PoE switch when it connect more than one PD device

3 Other products in the same category