24poorts Gigabit PoE switch

24 poorts Gigabit PoE switch met auto detectie en identificatie volgens IEEE802.3af/at

Topproduct!

NS-796-0011

Nieuw

€ 440,00 incl. BTW

Meer informatie

Features

Support power over ethernet cable device for example wireless AP and IP camera.
Support IEEE802.3af/at standard .
Data and power transmission distance 100m, it can be flexible installation for wireless AP and surveillance project.
4.1Mbit Packet buffer size；
10K Bytes of packet length；
Adopted storage forward switch system.
Support the full port loaded with IEEE802.3 af /at power supply；
Smart power and minimum consumption，guarantee PD requirement.
With power supply circuit protection function and protection back-end device safety
Automatically provide the adaptive device
PSE modular design can flexible select PoE mode, easy to install
Support IEEE802.1 Q VLAN and 4K VLANs
Support IEEE 802.3、IEEE802.3u、IEEE802.3x、IEEE802.3az standard；
Dynamic LED, Provide the tips of simple working state and troubleshooting

Specificatie

Network Port	10/100/1000MbpsPoERJ45port（port 1～port24） 2 Gigabit SFP port（25 port-26 port）
Network Port
Transfer Pattern	Full wired-speed store-and-forward
Performance	bandwidth：52Gbps(non-blocking） network delay（100to1000Mbps）：maximum 20μs（using 64 byte packet） network delay（1000to1000Mbps）：maximum 10 μs（using 64 byte packet） MAC address capacity：8K Frames filter and transfer rate： 10M: 14,880 pps/port 100M: 148809 pps/port 1000M: 1488095 pps/port
Network protocol and standard	IEEE802.3ad,LACP； IEEE802.3u,Fast Ethernet； IEEE802.3ab,Gigabit Ethernet standard IEEE802.3x,Full-duplex Ethernet data link layers； IEEE802.3af/at,Ethernet power supply POE standard ； IEEE802.3az,EEE ,Energy efficient Ethernet standard； IEEE802.3z ,Gigabit Ethernet fiber-optic standards；
POE pin	1/2(+)，3/6(-)；
LEDsindicator	Power、POE Link/ACT，1000M
LEDsindicator
Power supply	Total power：250W（All PoE port，port1～port24）single port max 30W
Power supply	Input power：250W；48V@8.3A DC output power；
Dimensions	Size（LxWxH）：440mmx 290mmx 44mm Weight：5.5kg
Dimensions
Environment	Operating Temperature：0°~40°C（32°~104°F） Storage Temperature：-40℃~70℃（-104°~158°F） Working Humidity：10%~90%(Non-condensing) Storage Humidity：5%~90%(Non-condensing)



EMC	CEClassB FCCPart15，ClassB VCCIClassB C-Tick



Certifications	CE,ROHS,FCC

Beschrijving van indicator LEDs

Indicator	Beschrijving	Normal State	Abnormal and Process
PWR	PWR Indicators	Red Light ON	If red light off, pls check whether the external power supply plug powered normal and whether the power adaptor connect correctly.
POE	POE Indicators	Red Light ON	If red light off, pls check whether the corresponding RJ45 access network device and the network cable connect correctly, whether the network cable is accord with Cat.5 standard(transmission distance max. 100meter)、whether the network cable and network device is damaged.
ACT/LINK	PD Device Connection Indication	Yellow Light ON	If light off，pls check whether the corresponding RJ45 access network device and POE powered normal、whether the network cable connect correctly and network device is damaged.
1000M	PD device Traffic Status	Green Light ON	If light off，pls check whether the corresponding RJ45 access network device and POE powered normal、whether the network cable connect correctly and network device is damaged.

Notities

Pls be careful the risk of strong current and security protection when product is carrying on power
Pls select the right power adaptor provide power for PoE switch，before using pls confirm if is it accord with the requirement of PoE switch
Pls don’t use PoE switch under the humid environment，avoiding water go into the product inside caused PoE switch breakdown
Pls start the power after the circuit connected
Pls don’t plug-in and plug-out the connection cable when product is carrying on power
Pls don’t use PoE switch under somewhere with more dust and EME
Pls don’t put heavy product on PoE switch , in order to having an accident
According to the IEEE802.3AF/AT standard, pls use the Cat.5 or above，transimission distance up to 100 m
Pls don’t exceed the maximum output power of PoE switch when it connect more than one PD device